Avid Technology System 5 Especificaciones descargar pdf (Pagina 95)

Chapter 8: Outputs and Output Routing 91

Using Built-In EQ on Outputs

One of two EQ types can be selected for the built-in EQ, on a

per-channel basis: a full-spectrum parametric digital EQ or an an-

alog-modeled EQ. EQ can be controlled from Channel Control or

on-screen.

To use the built-in EQ on an output:

1 Select an output bus.

2 Make sure the main Channel Control menu is shown in the

Channel Control displays.

3 Press the Channel Control encoder under the display showing

EQ. EQ controls are now available on the Channel Control en-

coders.

4 Press the In switch in the Channel Control Navigation section

to toggle the EQ processor in/out.

5 Adjust the Channel Control encoders for the displayed param-

eters. An EQ response curve appears on-screen when adjusting

EQ parameters.

6 Press the Analog button on-screen to toggle between the two

EQ types.

Accessing Comp/Lim and EQ Controls On-Screen

Built-In Comp/Lim and EQ on output channels can be adjusted

using on-screen controls.

To access the built-in Comp/Lim and EQ on-screen:

1 Go to the Outputs page and select the bus you want to adjust.

2 Click the Channel tab.

Using Inserts on Outputs

Software plug-ins and graphic EQs can be inserted on Mains,

Groups, Auxes, and Matrixes.

Inserting Plug-Ins on Outputs

Plug-ins can be inserted on outputs directly from the Outputs

page.

To insert a plug-in on an output bus:

1 Go to the Outputs page and select the bus where you want to

insert the plug-in.

2 In the Inserts section of the Outputs page, do one of the follow-

ing:

• Click one of the two

Inserts pop-up menus and choose a

plug-in directly from one of the Plug-In Rack submenus.

– or –

• Click one of the two

Inserts buttons to go to the Plug-In

Rack, and route the signal to the plug-in using Plug-In Rack

controls.

The name of the plug-in insert appears in the on-screen Plug-In

Insert button.

To toggle a plug-in on/off (in/out of circuit):

1 Select the channel on which the plug-in is inserted.

2 Go to the Outputs page and click the in/out button next to the

desired plug-in to toggle it in/out of circuit. When the button

LED is lit, it indicates that the plug-in is in-circuit. When unlit,

the plug-in is out-of-circuit (bypassed).

For more information, including a description of the

on-screen EQ controls and display, see Chapter 16, “EQ.”

Output EQ control in Channel Control

Output channel Channel tab

Aux 8

Lo Gain

You can also insert outboard hardware. See Chapter 18,

“Hardware Inserts.”

Click to assign (left); click to go to the plug-in rack (right)

For complete instructions on plug-ins, see Chapter 17,

“Plug-Ins.”

Plug-In In/Out button

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 312 313

Comentarios a estos manuales

Sin comentarios

Avid Technology System 5 Especificaciones Pagina 95

Comentarios a estos manuales